Shell Faceplate

Shell Faceplate

Ultra-Tips of Fixing Error Code 74

Symptom

E74. System Error. Contact Xbox Customer Support.

It must be annoying when you receive error messages like that. And they probably would keep on popping up your computer when you use your computer. If the error is not repaired right away, you would have further damage in your compute that might affect the efficiency of your operating system.

We strongly suggest that you run a quick scan for error code scan for your PC to check and fix the errors.

What Does Error Code 74 Means?

If you are using Xbox 360, it is more likely that you would receive the error code 74 error messages. And maybe you would a red ring on the console in the power switch. In fact, error code 74 is a quite common error a computer user would receive during daily uses. It is not a very complicated error, and it can also be fixed manually. If you are interested in fixing error code 74 yourself, you could take the following parts as a reference.

Instructions of Fixing Error Code 74

The solution to the error code 74 is actually performed on the Xbox. All you have to do is to following the steps given below.

First, you need to unplug the Xbox power cord and the audio and video cables. Then you need to hold the USB ports with one hand, and squeeze the top and bottom on the faceplate with the other hand. Then you have to take off the faceplate.

Next, you need to bend the gray ventilation shield with your hand. When you see the inside, you need to poke the stick trough the white holes. When you have done this, release the tabs and press the button on the face of the console. After that, you could lose the gray plastic inside as what the previous steps tell you.

When you have done first and second steps, you need to turn the Xbox upside down and screw all the clips off. Then, you have to lift the top of the bottoms shelf, take off 14 silver and 8 black screws. And turn the consol right side up and lift the outer shell in order to reveal the inside.

Then, you need to heat up the soldering iron, place the GPU on the motherboard and then apply the solder to the chip. And when you finish, cool the solder. Then you have to inspect the CPU chip. When you find the errant solder, take it off and replace it.

Finally, reassemble the Xbox 360, reconnect the power cord and audio and video cables.

To ensure the security and efficiency of your PC, get our ErrorCodeFix to fix Error code 74 in minutes.

About the Author

Mona has provided some solutions of <a href="http://fix-error-code.com/">error code errors</a> in this article. ErrorCodeFix will help you <a href="http://fix-error-code.com/">repair error code errors</a> in an easy and effective way.

is this site trustful/xbox 360 customized controller?

ive been looking to customize an xbox 360 controller. on youtube i saw an xbox 360 custom faceplate from xcm. so i searched xcm on google and found this website : http://www.xcm.cc/ do u think this site is trustful? i really wanna buy one of the covers for my controller...especially one of these : http://www.xcm.cc/xcm_360_wireless_pad_shell_chrome.htm
also im in the USA. here is a list from xcm.cc that shows the resellers : http://www.xcm.cc/Resellers.htm again im in the US. which site from those is probably most trustworthy. thx. i rllly dont want to be ripped off
so its a good site? also which one of the resellers should i use

I couldn't find anything bad about them... but a product they sold didn't work, normal stuff from any retailer. I like there products thanks for the link m8